Back toTop
Top Nav Top Nav Footer Nav
Login Or Register Now!

  1. Air-fill the Cubez™ balloon on the low-pressure setting with the Mini Cool Aire® Dual Pro™ inflator or with a hand inflator. Tape the balloon stem back onto itself. This will be the bottom of the Christmas present.

  2. Measure out two 1 yard lengths of ribbon #9734143 #40 candy cane ribbon.

  3. Wrap 1 length of the candy cane ribbon around the balloon, dividing it into two halves. Secure the ribbon with Uglu™ Dashes at the top, sides, and bottom of the balloon. It is best to put the dashes in place in a line and peel the paper as you work the ribbon around the balloon.

  4. Wrap the second length of ribbon around the balloon using the same method and crisscross the ribbons at the bottom of the balloon, dividing the balloon in the 4 sections.

  5. Cut one 18" length of ribbon #99110 silver wired ribbon and set aside. This will be the ribbon to tie off the bow.

  6. Measure out one 2 yard length of both the silver and candy cane ribbon. Make a bow with the two ribbons layered on top of each other. Tie off the bow with the 18" length of silver ribbon.

  7. Fluff and shape the bow, then glue directly to the top of the balloon package. 

Tip: Sheer the fabric back from the ends of the ribbon and cut a small amount of wire off to prevent puncturing the balloon.



Click Here For Printable PDF


 

Copyright © 2019 burton + BURTON®. All rights reserved. burton + BURTON® cannot be responsible for any typographical errors or omissions. The liability of burton + BURTON® for defective merchandise is limited to the replacement of said merchandise, not any losses incurred due to the failure of the product. Products featured may hold either licensed trademarks or trademarks owned by burton + BURTON®. Build time contingent on proper equipment usage and skill.